Product ID:SHIELDED METAL ARC WELD(SMAW)(C STEEL;LOW HC STEEL;LOW (SUP)
MSDS Date:06/01/1994
FSC:3439
NIIN:00-610-1899
MSDS Number: CGMVV

UNIWELD PRODUCTS, INC

2850 RAVENSWOOD RD
FORT LAUDERDALE, FL 33310
US

Emergency Phone: 305-584-2000

Info Phone: 305-584-2000

Cage: 17941

UNIWELD PRODUCTS, INC

8427 FORT LAUDERDALE, FL 33310 US

Telephone: 954-584-2000

Cage: 17941

IRON, GROUP A=70-90%,GROUP B=60-80%,GROUP C=68-90%.

CAS: 7439-89-6

RTECS: NO4565500

Fraction By Weight: SEE ING

MANGANESE (SARA 313)

CAS: 7439-96-5

RTECS: OO9275000

Fraction By Weight: 1-5%

OSHA PEL C, 5 MG/M3 (FUME)

ACGIH TLV: 0.2 MG/M3; 9596

ALPHA-ALUMINA (ALUMINUM OXIDE) (SARA 313) (IN ONLY GROUP A)

CAS: 1344-28-1

RTECS: BD1200000

Fraction By Weight: <5%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9596

CALCIUM CARBONATE (MARBLE) (LIMESTONE), GROUP B=3-10%,

CAS: 1317-65-3

RTECS: EV9580000

Fraction By Weight: SEE ING

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9596

CELLULOSE (PAPER FIBER), GROUP A=<5%, GROUP B=<2%

CAS: 9004-34-6

RTECS: FJ5691460

Fraction By Weight: SEE ING

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3; 9596

MICA, IN GROUP A ONLY

CAS: 12001-26-2

RTECS: VV8760000

Fraction By Weight: <5%

OSHA PEL 20 MPPCF; Z-3

ACGIH TLV: 3 MG/M3 RDUST; 9596

SILICA, CRYSTALLINE - QUARTZ

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: <5%

OSHA PEL SEE TABLE Z-3

ACGIH TLV: 0.1 MG/M3 RDUST;9596

SILICON IN GROUP B ONLY

CAS: 7440-21-3

RTECS: VW0400000

Fraction By Weight: <2%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9596

TITANIUM DIOXIDE, GROUP A & B.

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: <10%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9596

CALCIUM FLUORIDE (AS F), GROUP B=1-12%, GROUP C=5-15%.

CAS: 7789-75-5

RTECS: EW1760000

Fraction By Weight: SEE ING

CHROMIUM (SARA 313) (CERCLA) IN GROUP C ONLY

CAS: 7440-47-3

RTECS: GB4200000

Fraction By Weight: <1%

OSHA PEL 1 MG/M3

ACGIH TLV: 0.5 MG/M3; 9596

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

NICKEL (SARA 313) (CERCLA), ONLY IN GROUP C

CAS: 7440-02-0

RTECS: QR5950000

Fraction By Weight: 1-5%

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3; 9596

MOLYBDENUM ONLY IN GROUP C

CAS: 7439-98-7

RTECS: QA4680000

Fraction By Weight: <1%

OSHA PEL 10 PPM.

ACGIH TLV: 10 PPM.

MAGNESITE, GROUP A=<2%, GROUP B=<5%

CAS: 546-93-0

RTECS: OM2470000

Fraction By Weight: SEE ING

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9596

SILICATE BINDERS

Fraction By Weight: <10%

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:WELD CONSUMMABLES AS SHIPPED ARE
NONREACTIVE,NONFLAMM,NONEXPLO,TECHNICALLY NONHAZ TIL
WELDED.ELECTRIC ARC WELD MAY CREATE ONE/MORE OF:ARC RAYS CAN INJURE
EYE,BURN SKIN;ELECTRIC SHOCK CAN KILL;FUME/GAS CAN BE DANGEROUS TO
HEALTH.
Explanation of Carcinogenicity:PER MSDS:NI,CR,WELDING FUMES.CALIFORNIA
PROP 65.
Effects of Overexposure:DISCOMFT,DIZZ,NAUU,DRYNESS,IRRIT
NOSE/THROAT/EYES/RESP SYS/EYE/SKIN.METAL FUME FEVER.SKIN/EYE
BURNS,PULM EDEMA,BRONCHITIS.LUNG DMG,ASTHMA-LIKE SYMPT,SEVERE
INJURY/DEATH,ULCERS,ALLERGIC RX,TIGHTNESS OF CHEST,FEVER,LUNG
FIBROSIS,SIDEROSIS,CNS EFFECTS,EMPHYSEMA,DERM,PNEUMONIA,BONE
EROSION,WT LOSS/APPETITE,DIFF BREATH.
Medical Cond Aggravated by Exposure:PERSONS W/PRE-EXITING IMPAIRED LUNG
FUNCTIONS(ASHTMA-LIKE CONDITIONS).

First Aid:CALL FOR MED AID.EMPLOY FIRST AID TECHNICQUES RECOMMENDED BY
THE AMERICAN RED CROSS.EYE/SKIN:IF IRRIT OR FLASH BURNS DEVELOP
AFTER EXPOSURE CONSULT PHYSICIAN.

Flash Point:NP
Autoignition Temp:Autoignition Temp Text:NP
Lower Limits:NP
Upper Limits:NP
Extinguishing Media:NONE SPECIFIED BY MANUFACTURER.
Fire Fighting Procedures:NONE SPECIFIED BY MANUFACTURER.
Unusual Fire/Explosion Hazard:WELDING ARCS/SPARKS CAN IGN
COMBUSTIBLE/FLAMM PRODUCTS.SEE AMER NAT STD Z49.1.

Handling and Storage Precautions:READ/UNDERSTAND MFG
INSTRUCTION/PRECAUT ON PROD LABEL.SEE AMER NAT STD Z49.1 & OSHA
29CFR1910.MIN EXPO BEL PEL/TLV.ALWAYS USE EXHAU VENTILATION.
Other Precautions:DETERMINED COMPO/QUANT OF DECOMPO FUME/GAS-AIR SMPL
INSIDE WELDER HELMET/BREATH ZONE.USE INDUSTRIAL HYG PRACTICES.

Respiratory Protection:USE NIOSH APPROV/EQUIVALENT FUME RESPIRATOR OR
AIR SUPPLIED RESP WHEN WELDING IN CONFINED SPACE/WHERE LOC
EXHAU/VENTI DOESNT KEEP EXPO BEL PEL/TLV.
Ventilation:USE ENOUGH VENTI,LOC EXHAU @ARC/BOTH-KEEP FUME/GAS BEL
PEL/TLV IN WORKER BREATH ZONE/GEN AREA.TRAIN WELDER-HEAD AWAY.
Protective Gloves:WELDER GLOVES
Eye Protection:HELMET,FCSHIELD W/FIL LENS,SCREEN
Other Protective Equipment:FLASH GOGG.RULE OF THUMB-BEGIN W/SAHDE
#14,ADJUST.WRAIST BANDHEAD,BODY PROT FRM RADIATION/SPARKS/ELECT
SHOCK.HATS,ARPON
Work Hygienic Practices:TRAIN WELDER NOT TOUCH LIVE ELECTRICAL PARTS &
INSULATE FRM WORK/GROUND.
Supplemental Safety and Health
PROD:LOW H,LOW ALLOY STEEL. HAZ DECOMPO:OXIDES/CMPDS.ALSO METAL
COAT,#OF WELDERS,VOL OF WORKAREA,QUAL/AMT OF VENTI,WELDER HEAD
POSITION TO PLUME,ATM CONTAM.FE OXIDES,FLUORIDES,OXIDES OF
CA/MN/AL/CR,NI CMPDS,SI,MO,MG,TI,CO,CO2,OZONE,NI OXIDES FRM ARC
RADIATION.

HCC:N1
Boiling Pt:B.P. Text:NP
Melt/Freeze Pt:M.P/F.P Text:NP
Decomp Temp:Decomp Text:NP
Vapor Pres:NP
Vapor Density:NP
Spec Gravity:NP
pH:NP
Viscosity:NP
Evaporation Rate & Reference:NP
Solubility in Water:NP
Appearance and Odor:NP
Percent Volatiles by Volume:NP
Corrosion Rate:NP

NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:WELD FUME/GAS CANT BE CLASSIFIED
SIMPLY.COMPO/QUANT DEPEND UPON METAL
WELD,PROCESS,PROCEDURES,ELECTRODE.COMPLEX (SUPPLE)

Waste Disposal Methods:PREVENT FRM CONTAM SURROUNDING ENVIRO.DISCARD
ANY PRO/RESIDUE/DISPO CNTNR/LINER IN ENVIRO ACCEPTABLE MANNER IN
FULL COMPLIANCE W/FED/STATE/LOC REGS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.